Top 5 Cheapest Cool New Gadgets On Amazon That You Can Buy Under Rs 1500 In 2022

Top 5 Cheapest Cool New Gadgets On Amazon That You Can Buy Under Rs 1500 In 2022

Top 5 – Imagining your life without any gadgets sbobet88 is not a question we’re going to ask. Even the thought of it would be totally absurd today, no? From the tiniest Bluetooth in-ear earphones to the large electrical vehicles we drive, we are so heavily surrounded by and dependent upon gadgets and gizmos that 21st-century technology and human beings seem to be slowly merging into a single entity. Provided below is our list of the top 5 cheapest cool new gadgets available on Amazon India that you can buy under Rs 1500 in 2022.

New tech gadgets and inventions are being brought to life at such a rapid rate that it is becoming increasingly difficult to keep your pace up with the piling innovations. And you can’t even say no, because if you fail to keep up with the times, you will become irrelevant within the blink of an eye. But no need to panic! As long as we walk hand-in-hand and keep supporting one another, you won’t even notice how fast time will fly, and that too, comfortably.

Top 5 Cheapest Cool New Gadgets On Amazon That You Can Buy Under Rs 1500 In 2022

Portronics 6 Port UFO Charging Station

For those of you who are fascinated by aliens and UFOs, although there may still be time for their actual discovery, you can meanwhile get yourself this 6-port UFO-shaped charging station.Say goodbye to those traditional four-socket power extension strips when you have at your service a full 6-port charging station with each producing an 8A output.

Portronics Auto 12 In-Car Bluetooth Receiver

The next cool gadget we found on Amazon to include in our top 5 list was this one. The Auto 12 in-car Bluetooth receiver, again from Portronics, is for those of you who drive a car with a non-Bluetooth stereo system.

Tukzer Fully Foldable Mobile And Tablet Stand

We know what you’re wondering, that mobile/tablet stands are pretty common these days, right? But let us tell you, this one is no ordinary mobile or tablet holder. It is also angle and height-adjustable and fully foldable.

Vagmi 6-in-1 Plastic Military Pen

Straightaway coming to point, the 6 tools or functions it comes with include a torch, compass, a small two-sided screwdriver, a phone stand, a stylus and of course, a pen.

Zinq Technologies 5 Fan Cooling Pad

All the work from home students and professionals, do answer this one honestly. Do you work on your study table the entire day, or ultimately end up taking your laptop to the bed in the end? If you dare to admit being a person of the latter type, then we’d like to inform you that keeping your laptop on any surface other than a smooth plain tabletop might result in it getting heated up quickly, thereby affecting its performance and longevity.

Metering Techniques

Metering Techniques

Metering is a vital part of any photography, whether inside the studio or out on location.

I know that some photographers these days who use digital cameras may feel that they don’t need to use a separate flash meter in the studio, but let me tell you, a meter is an invaluable tool. Most studio photographers I know would be without a flash meter and there is a good range of models available on the market today.

Using a flash meter is easy, they all work in pretty much the same way. Some may have more buttons and readouts, but they all do the same job. Basically by setting the ISO of the film and the shutter sync speed of the camera and the flash meter will tell you what aperture to shoot at.

If you are using film, set the ISO, as usual, if you are shooting with a digital camera I would recommend a setting of 200 ISO.

The camera shutter or sync (short for synchronization) speed used with flash is important, you can use any speed between a 60 and a 250, but I would recommend 125 of a second. This speed will give you plenty of latitudes and you won’t get any cut-off. Cut off is caused by using a shutter sync speed that is too fast for the lights that you are using and only half of the shot will be exposed, the other half will be cut off and not exposed because of the speed of the shutter opening and closing too quickly.

I have used Gossen and Sekonic meters and both companies make great products. Most meters these days are digital and have a simple readout and display. To trigger the flash, meters have a coax socket, so that a standard sync lead can be attached from a flash head to the meter. Or if you have an assistant to fire your lights you can use most meters cordless! Measurements are very accurate, usually in tenths of a stop.

So far so good, but how do we actually use the meter?

You can do this in a number of ways. By measuring the light that falls on the subject and setting the aperture that the meter gives you. Or by measuring the light on the subject, then reducing or increasing the power of the lights to give you the aperture that you want.

Let me explain, say that you have a simple two light set up for a portrait shot and you want to shoot at between f 8 and f11 to give you a good depth of field. By using the meter we can determine the amount of light falling on the subject and by adjusting the power of the lights up or down, we can get the aperture that we need, say f11.

Also by using the meter, we can easily set a ratio of say two to one or even three to one. A ratio, meaning that we can set one of the lights as the main light and the second light as a fill-in. We can do this by using the meter to help us adjust the lights and set them two stops or three stops apart. So our main light will give f11 and our fill-in will give us f5.6 / f8.

This ratio will help to build some shadow into the picture which gives the face of the subject shape and form. If we lit the portrait with both lights at equal power, the light will be even, but rather bland, by introducing a ratio we can get more interest in the picture.

Where do we actually point and position the meter?

Common sense is used here, obviously, the measurements are taken from the highlight areas. When we shoot people the lightest areas will be on the skin tones and maybe clothing. When we look at a person the forehead, cheeks, and noses are the best places to meter as they will reflect the most light. If the subject has white clothes we can also take measurements from these areas. So position the flash meter so that the cell that receives and measures the light is exactly on one of these highlights.

With the meter programmed and the sync lead attached position the meter on a highlight area, take a reading of each light and a further reading pointing the meter direct at the camera. You can then begin as we have already said to adjust the lights up and down in power, either to set a ratio or to select a preferred aperture. When the lights are fully adjusted and the preferred aperture or ratio is achieved the shot can be taken.

So we can use a flash meter to help us adjust our lights to give us a working aperture, to set a ratio to create subtle shadow areas and save us a great deal of time and money whether shooting on digital or film. For more technical work, such as multiple flashes, a flash meter is invaluable

If you are using studio lighting without a flash meter, but you’ve thought about buying one, I would look at meters made by Gossen or Sekonic they are all very well designed and easy to use and from companies that have been making meters for a long time.